Debugging Interface; Mounting (Optional) - Baudcom BD-2GPON-OEO User Manual

GPON Repeater Operation Manual Chapter 3 Hardware Installation
Figure 0-2 DC48V Power Cord
Figure 0-3 DC Power Cord Connection Diagram

3.5. Debugging Interface

MGMT interface and CONSOLE interface are debugging interfaces for equipment, which are only
used for debugging and maintenance of equipment.

3.6. Mounting (Optional)

For easy installation in 19-inch standard cabinet, 1U tray bracket is an option for BD-2GPON-OEO
equipment, as shown in the figure below. Two devices can be fixed on each tray bracket.
Copyright © 2018 Shanghai Baudcom Communication Device Co.,Ltd. All Rights Reserved. 11 / 18