Table of Contents
Advertisement
Quick Links
USER'S INFORMATION MANUAL
MODEL 369RAN
OIL FURNACE
NOTE TO INSTALLER:
This manual must be left with the equipment user.
!
WARNING: If the information in this manual
is not followed exactly, a fire or explosion may
result causing property damage, personal injury or
loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
— WHAT TO DO IF YOU SMELL OIL:
— Do not try to light any appliance.
— Do not touch any electrical switch; do not use
any phone in your building.
• Immediately call your fuel supplier from a
neighbor's phone. Follow the fuel supplier's
instructions.
• If you cannot reach your fuel supplier, call the
fire department.
— Installation and service must be performed by a
qualified installer, service agency or the fuel
supplier.
Do not use this furnace if any part has been under
water. Immediately call a qualified service techni-
cian to inspect the furnace and to replace any part
of the control system and any oil control which
has been under water.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bryant 185248
Summary of Contents for Bryant 185248
- Page 1 — Installation and service must be performed by a qualified installer, service agency or the fuel supplier. Do not use this furnace if any part has been under water. Immediately call a qualified service techni- cian to inspect the furnace and to replace any part of the control system and any oil control which has been under water.
- Page 2 Oil Furnace is among the soundest investments today’s homeowner can make. Your new furnace is truly a tri- umph of technology in home heating. Its unique silencer within the heat exchanger, insulated cab- inet, and rubber blower mounts make it among the quietest units on the market.
- Page 3 Stainless steel combustion chamber/primary heat exchanger. Unique silencer system reduces combustion noise. Heat exchanger designed and shaped to effi- ciently transfer heat from furnace into the home. Fully insulated internal walls to minimize heat loss. Supply-air plenum. High limit control to prevent overtemperature operation.
-
Page 4: Important Facts
• Do not cover the furnace, store trash or debris near it, or in any way block the flow of fresh air to the unit. -
Page 5: Steps For Starting Your Furnace
CHECK AIR FILTER: Before attempting to start your furnace, be sure the furnace air filter is clean and in place. See “Performing Rou- tine Maintenance” section in this manual. Then proceed as follows: STEPS FOR STARTING YOUR FURNACE 1. Open all warm air registers and make sure that all return-air grills are unobstructed. -
Page 6: Filtering Out Trouble
5. If furnace blower will be neces- sary for cooling system, remem- ber to turn electric power back on when needed for air condi- tioning. 6. If furnace is being shut down be- cause of a malfunction, call your dealer as soon as possible. ALWAYS KEEP... -
Page 7: Before You Request A Service Call
Remedy any problem when necessary. • Inspect the return-air duct connec- tions at the furnace to ensure it is physically sound, sealed to the fur- nace casing, and terminates outside the space containing the furnace. - Page 8 Cancels: New OM16-12 Catalog No. 5336-906 11-00 © 2000 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indpls, IN 46231 Printed in U.S.A.
Need help?
Do you have a question about the 185248 and is the answer not in the manual?
Questions and answers