Disney Aladdin AD-106 Manual

3+
Important Message to Customers
Thank you for purchasing one of our many top-quality electronic products Please take a moment to read through these
instructions to help you understand the safe and proper way to use this toy to extend its usability.
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and
human health due to the presence of hazardous substances.
Genie Lamp Controls
ON/OFF/DEMO Switch
Slide the switch to the ON position to play with the
speaker.
Wake/Demo Button
Press to hear speech and sound effects!
Magic Sensor
Gently rub the magic sensor on the side of the lamp.
When you hear a prompt from Genie, make a wish,
then listen for Genie's answer!
Volume Switch
Adjust the volume by sliding the switch to Low,
Medium, or High.
AUX-IN Jack
Connect one end of a 3.5mm audio cable (not
included) into the AUX-IN jack and the other end to
the headphone jack of your audio device.
Press PLAY on your audio device to start playback.
Control and navigate tracks from your audio device,
too.
AUX-IN Jack
Volume Switch
Low, Medium, High
Note: The speaker will automatically time out after 20 minutes.
Press Wake/Demo to resume audio.
1
MODEL: AD-106
Genie Lamp
Speaker
EN
Wake/Demo Button
Magic Sensor
Area
ON/OFF/DEMO Switch