Download Print this page

Pyle PBMSPRG3 User Manual page 3

Wireless bt portable speaker radio system

Advertisement

Wireless BT Streaming:
1. Turn the power button to "ON". The LED light turns blue and blinks quickly, then
enter Wireless BT mode and you will hear a "Bluetooth Device Ready To Pair" tone.
2. Activate Wireless BT of your mobile phone and search for the device name
"PyleUSA" then connect it. The blue LED light blinks slowly and will beep three
times once connected.
3. Play the music from your mobile phone and enjoy.
4. Press Previous or Next button on the device or on Mobile phones to select
songs you like.
5. Press Play/Pause button on the device or on Mobile phones to play/pause the
music.
6. Use the Wireless BT device to adjust volume up and down or press and hold the
Previous or Next button to adjust volume down and up.
Playing music from USB disk & Micro SD card:
1. Turn the Power button to "ON".
2. Insert USB ash disk or Micro SD card into slot, the music stored will be played
automatically and blue LED will be lit.
3. Under playing mode, short press Previous or Next button to select songs you
like, or press and hold the Previous or Next button to adjust volume down and up.
4. PLAY/PAUSE to play or pause music.
5. Please turn the Power button to "OFF" if you will not use it.
Remark: Under Wireless BT playing mode, insert Micro SD or USB will disconnect
the Wireless BT and switch to play the USB or Micro SD card. You can press the
MODE button to switch to Wireless BT mode again.
How to Use FM Radio:
1. Under FM radio state, the audio cable provided is the antenna. Please insert the
audio cable to get the best FM signal before using.
2. Turn the power button to "ON", press the "MODE" button, the speaker will
prompt "The Radio Mode" when entering FM state.
3. Under playing mode, short press "Play/Pause" button to auto search the FM
Channel and store it automatically.
4. Press Previous or Next button to change the stored FM channel.
www.PyleUSA.com
3

Advertisement

loading