546NS Transducer
June 2021
Mounting Parts
Note
Contact your
Emerson sales office
information.
Key
Description
81
Mounting Plate
Yoke Mounting
657, 657NS, 667, 667NS, all sizes
for seismic mounting of 546NS
Pipestand mounting
81
Surface mounting
Bulkhead mounting
82
Cap Screw
Yoke mounting (2 req'd)
657NS & 667NS, sizes 70 & 80
Pipestand mounting (2 req'd)
Surface mounting (2 req'd)
Bulkhead mounting (2 req'd)
85
Washer
Yoke mounting (4 req'd)
All types, all sizes,
Pipestand mounting (4 req'd)
86
Cap Screw (2 req'd)
Yoke mounting
657NS & 667NS, Sizes 70, 80
87
Spacer (2 req'd)
Yoke mounting
657NS & 667NS, Sizes 70, 80
90
Pipe Clamp
Pipestand mounting
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
24
E 1997, 2021 Fisher Controls International LLC. All rights reserved.
for mounting parts ordering
Diagnostic Connections
FlowScannert diagnostic system hook‐up
Includes pipe tee, pipe nipple, pipe bushings,
connector body, and body protector. See figure 2
for part identification.
Note
Contact your Emerson sales office for diagnostic connections ordering
information.
If the transducer is used in a valve assembly with a positioner, no
hook‐up for diagnostic testing is required for the transducer. The
hook‐up for diagnostic testing should be installed at the positioner.
Description
For units with gauges
SST fittings
Brass fittings
For units without gauges
SST fittings
Brass fittings
Instruction Manual
D103425X012