Raid Manager - Dahua NVR41-4KS2 Series User Manual
Hide thumbs
Also See for NVR41-4KS2 Series:
- User manual (404 pages) ,
- User manual (416 pages) ,
- User manual (421 pages)
Table of Contents
Advertisement
Parameter
Channel
Manufacturer
IP Address
TCP Port
User Name
Password
Remote CH No.
Decoder Strategy
Protocol Type
Encrypt
3. Click OK.
Step 3
Click Next to complete the remote device registration.
Click
Once the multiple-sensor device has registered to the device, the system will display the
channel status on the Link info. It shows one remote device has occupied two channels:
D1, D3.
4.1.4.5 RAID Manager
Background Information
RAID (redundant array of independent disks) is a data storage virtualization technology that
combines multiple physical HDD components into a single logical unit for the purposes of data
redundancy, performance improvement, or both.
Table 4-8 Remote channel parameters
Description
From the Channel drop-down list, select the channel that you
want use on the Device to connect the remote device.
From the Manufacturer drop-down list, select the manufacturer of
the remote device.
In the IP Address box, enter the IP address of the remote device.
The default is 192.168.0.0 which the system cannot connect to.
The default value is 37777. You can enter the value as needed.
Enter the user name of the remote device.
Enter the password of the user for the remote device.
Enter the remote channel number of the remote device that you
want to add.
From the Decoder Strategy drop-down list, select Default,
Realtime, or Fluent.
● If the remote device is added through private protocol, the
default type is TCP.
● If the remote device is added through ONVIF protocol, the
system supports Auto, TCP, UDP, or MULTICAST.
● If the remote device is added through other manufacturers,
the system supports TCP and UDP.
If the remote device is added through Onvif protocol, selecting the
Encrypt check box will provide encryption protection to the data
being transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
The remote device information is displayed on the Added Device list.
to change the remote device information. Click
127
User's Manual
to delete remote device.
Advertisement
Table of Contents
