Step 3: Physical Installation Prep; Recommended Tools And Materials; General Safety Precautions - FrontRow CM3000 Installer's Manual

Step 3: Physical Installation Prep

Nearly everything you need to install your FrontRow CM3000 is included in its shipping box, or in the shipping box of the ple-
num or wall enclosure containing the CM3000. However, you will need some basic tools and materials, depending on how your
classroom is built.

Recommended tools and materials

• Plastic cable (zip) ties
• Cable tacks/staples
• Drill (or hammer drill for concrete walls)
• Drill bits (masonry bits for concrete walls)
• Slotted screwdriver
• Level or ruler/tape measure
• Crimp pliers or scissors
• Ladder
• Staple gun
• Safety goggles

General safety precautions

• Do not install or use the CM3000 near water or a heat source
• Clean only with a dry cloth
• Protect all cables from wear and damage from doors or other hazards
• Use only accessories specified by FrontRow
• Refer servicing to qualified service personnel
• Wear safety goggles when using power tools
18