Installation - Home Decorators Collection RMGRW2828 Use And Care Manual

Installation

1
Preparing the wall
NOTE: It is best to nd a stud in your wall to ensure
the cabinet hangs securely.
□ Place the bracket (B) against the wall and determine your
desired hanging location. Using a pencil, mark three
locations on the wall that match up with the mounting
bracket's (B) pre-drilled holes.
□
Ensure the marks are horizontally straight by using a level.
□
Use a hammer to gently punch the anchor (AA) halfway
into the wall at each marked location. Finish screwing
in the anchor (AA) with the screwdriver.
X
X
AA
B
3
Hanging the cabinet
□ Lift the cabinet (A) above the bracket (B) and place it
against the wall.
□
Slide the cabinet (A) down the wall, hooking it onto the
bracket (B).
B
X
A
2
Hanging the bracket
□ Align the bracket (B) holes with the anchors (AA) against the
wall.
□
Insert the screws (BB) through the bracket holes and into the
anchors (AA). Finish screwing in with the screwdriver.
AA
B
4
Installing the shelves
□ Insert 4 shelf pins (CC) into 4 pre-drilled holes at the
desired height of the top shelf (C) inside the cabinet (A).
□
Repeat for the lower shelf with the 4 remaining shelf
pins (CC) and the other shelf (C).
□
Slide each shelf (C) into the cabinet (A) above each set
of pins (CC).
A
4
BB
C
C
CC