Switching On For The First Time; After Sales Service; Technical Data - Frico Infraduo IHD17 Assembly And Operating Instructions Manual

Table of Contents

Advertisement

GB
voltage must be switched off to make sure
that the wiring is dead!
Only switch on the appliance when
installation is complete.

SWITCHING ON FOR THE FIRST TIME

• After switching on the appliance for the
first time and following extended periods
on non-use, the appliance may smell for a
short time.
CLEANING
• First, disconnect the equipment from the
power supply system!
• After the appliance has cooled down, the
housing can be wiped dry.
• Do not touch the quartz rods with your
fingers, since stains could build up from
such a contact.
• The reflector should be cleaned regularly
• Do not use any abrasive or caustic cleaning
agents!
• Never immerse the appliance in water!
Danger to life!
AFTER-SALES SERVICE
• All repairs must be referred to authorised
personnel! Therefore, you should contact
your specialized dealer or the customer
service.
Important! Any tampering with the
appliance will invalidate the warranty.
• Repairs carried out improperly and by
unqualified persons may have serious
consequences for the user!

TECHNICAL DATA

Rated voltage: 230 V/50 Hz
Rated output: 1650+7W / 2000+7W
Dimensions (LxWxD): 82,5x9,5x12,5 cm
Weight about: 3,35 kg
Protective system IP65
4
Infraduo IHD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infraduo ihd20

Table of Contents