Subscribe to Our Youtube Channel
Related Manuals for Wisper 905 Torque
Summary of Contents for Wisper 905 Torque
- Page 1 Wisper Traditional Central Handlebar Display 905 Torque, 705 Torque and 806 Torque 2014 – 2018/9...
- Page 2 Contents Preface Material & waterproofing grade Graphic Settings Interface Button Installation Preparation Power On/Off Speed Limit Backlight Brightness Time Operation Level Switch TRIP Clearance TRIP/TOTAL Capacity Error Code Warranty...
- Page 3 PREFACE Please read this manual carefully before using our product. MATERIAL & COLOUR Case Material ABS, temperature range -20℃ - 50℃. Black Waterproof Grade: IP65...
- Page 4 DISPLAY SETTINGS Unit, Speed Limit, Brightness, Time INTERFACE Indicating: Battery capacity, Riding mode, Trip and ODO, Clock, Error codes. BUTTONS INSTALLATION Install the display on the handlebar and adjust its location. Plug it into the controller when the power is off PREPARATION Make sure there is a good connection before turning the power on POWER ON/OFF...
- Page 5 Hold down Mode (Top Button) to start the display. Hold down Mode again to switch off UNIT Hold down Mode to start the display. Hold down (+) and (-) to set mode Press (+) or (-) to change the unit to km or miles. Press M to save and skip to the speed setting BACKLIGHT BRIGHTNESS Press Mode twice until you see bLt to save exiting setting and skip to backlight setting press Mode again.
- Page 6 OPERATION LEVEL SWITCH Riding Mode Default range 0 – 5, press (+) or (-) to change the levels. 0 no output, Default level 1 will be displayed when switched on Climbing mode: Default range 5 for hill climbing, 5 is the maximum assistance output Hold down (-) to start assist walk assist.
- Page 7 ERROR CODE When something goes wrong with the system an error code will flash on the screen. Check details on attached list. ERROR CODES Error code definition: Error code Description Error code Description Throttle not Controller in-home Overheating position Throttle Fault Temperature Sensor Fault Low Voltage...
- Page 8 Warranty term 24 months. Any dispute with quality must be stated within 24 months of purchase Warranty is voided under the following: 1. Tampering with the internals of the display 2. Connector damage 3. Scratch or damage whilst storing after delivery 4.
Need help?
Do you have a question about the 905 Torque and is the answer not in the manual?
Questions and answers