System Description - ARTHUR HOLM ERT User Manual

SYSTEM DESCRIPTION

General
ERT interfaces provide an easy and convenient system to control and
diagnose motorised monitors, microphone lifts and other automated
solutions by Arthur Holm helping to reduce the installation costs in terms
of both equipments and time.
Easy to install and set-up, they facilitate a quicker installation and
eliminate the need of external relay boxes and extra power outlets. It
is also possible to have Arthur Holm's virtual support on site as long as
there is an Internet connection available.
AHlink wireless control is also integrated in ERT interfaces, providing an
easy and direct access to the most common settings through an app
and making the start-up and future interventions hassle free. This means
there is no need to access physically the unit to set-up or diagnose its
installation.
Highlights
• OTAS (One Touch Addressing System)
• IP to RS422/RS485 interface
• ERT-60 2 AHnet inputs (RS-422) / ERT-30 1 AHnet input
• Controls up to 60 units (ERT-60)
• RDM system (Remote Diagnostic and Maintenance)
• Remote/local control and management
• Wireless control through AHlink app
Box Contents
Before the installation of your device please check the contents of the
shipping box, it must contain the following items:
• ERT unit
• Power cord
• Power supply 100-2 40Vac, 50-60Hz. Output 12V
• User guide
8