Table of Contents
Advertisement
ZSI-320 User Manual
Operation
Video capture
AC
Internal use only – MUST NOT BE MODIFIED
Mode
Site controller
To indicate the presence of an additional site controller unit. If the box is ticked all messages are
forwarded on to the site controller to handle.
If set to Off the unit will resolve all switching and telemetry issues itself. It will use the matrix output
number defined in the next section and command the local matrix to switch.
Matrix Output
The matrix output number, which is connected to the ZSI-320 video input.
Issue 03
Default = On
Default = 4
MEYERTECH LIMITED
Page 15 of 20
Advertisement
Table of Contents
