Cobra MicroTalk PMR250 Manual page 13

PMR250-UK.qx 6/17/99 2:55 PM
Advanced Features
Tone Tone Setting
Settings
The Key Stroke Tone and Talk Confirmation Tone
can be temporarily turned on or off during the
operation of your MicroTalk 2-Way Radio.
Key Stroke Tone Indicator
You will hear an audible tone when any button is
pushed (except PTT button). To turn the audible
tone on or off:
Note
The Key Stroke Tone and
Talk Confirmation Tone can
be temporarily turned on or
off at any time while in
operational mode.
Push and hold
1
disappears from the LCD display.
To return to the audible mode, push and hold
2
button until
display.
24
Page 24
button until icon
icon appears in the LCD
Advanced Features
Talk Confirmation Tone Indicator
To te m po ra rily eliminate the Talk Co n f i rm ation To n e :
Push and re l e a s e b u t ton until
1
Push and release either
2
icon appears in the LCD display.
Push and hold button. icon will
3
disappear.
Note
icon flashes.
For more information see
Talk Confirmation Tone
section on page 14.
Note
To restore the Talk
Confirmation Tone repeat
steps 1- 3 as shown to
the left.
b u t ton until
Note
When you push and hold
the PTT button,the unit
exits out to operational
mode.
If after 10 seconds no selec-
tion is made, the unit will
return to operational mode.
25