Table of Contents
Advertisement
The ACCESS CONTROL and CA menus
The ACCESS CONTROL menu*
you to activate a parental lock for you to
be able to lock specific channels. You
can also set a maturity rating that
determines which programmes require
the entering of an access code.
When you enter the EDIT CHANNEL/
STATION LIST menus or bring up a
channel/station list, you can lock
(and later unlock) channels in the lists to
avoid others from watching these
channels. Select the channels you wish
to lock. If a channel is present in, for
example, more than one GROUP and
you lock it in the CHANNEL LIST, it will
be locked in all groups automatically.
Whenever you try to access locked
channels, you are asked to enter your
access code.
From the factory parental lock is not
activated. In order to use the parental
lock function, you must enable the
access code. You can then select the
specific channels that should be locked.
The access code system of the DVB
Module is not the same as the pincode
system for your television, but it may be
easier for you if you choose to use the
same code for both systems.
*
The first time you enter the ACCESS
1
CONTROL menu, you are asked to select a
new access code.
>> SETUP menu
allows
Contents of the ACCESS CONTROL menu ...
1
PARENTAL LOCK ... Enable the access code.
You can lock the channels you wish to be
locked when you bring up the EDIT
CHANNEL/STATION LIST menus or a
channel/station list and bring up
information on the chosen channel by
means of the blue button. When you lock
the channel, you can also set the time
period you want the lock function to be
activated. If you do not change the time
period, it is locked all the time.
RATING (YEARS) ... Set a maturity rating for
the TV programmes. This means that
programmes exceeding the maturity rating
chosen by you can only be watched when
the access code is entered. Only if
available from your programme provider.
When the access code is activated and a
channel is locked due to maturity rating,
some programme providers require you to
enter the access code each time you select
the channel, and not just the first time the
channel is selected after the television has
been in standby mode.
Should you forget your code ...
If you forget your access code, enter the
ACCESS CONTROL menu and key in '9999'
three times. The parental lock is then
disabled and you must enable the code
again and enter a new personal code.
Note: The access code described here is not
the same as the pincode you may receive
with your Smart Card. For information about
Smart Card pincode, consult your
programme provider.
ACCESS CONTROL
PARENTAL LOCK
RATING
NEW ACCESS CODE
Contents of the CA menu ...
CA ... Use this menu to access the inserted
CA Module or card. The contents of the
menu depend on your programme
provider. You can also access the CA
Module or card via the Beo5 display or the
menu overlay.
CAM ACTIVE... Use this menu to activate or
deactivate the CA module for terrestrial,
cable or satellite. In some countries, it may
be useful to disable the CA module for
satellite to get an optimal performance
from the terrestrial CA module.
16
ON
7
Advertisement
Table of Contents
