Advertisement
Quick Links
Quick Install Guide For bwa™ Kit - BP501/601
TOOL YOU WILL
NEED
STEP
1
STEP
2
STEP
3
1
WARNING!
Please contact an electrician or your local electrical company to
connect the Wi-Fi connector for you. DO NOT OPEN THE SPA
SYSTEM AND ATTEMP TO CONNECT THE WI-FI CONNECTOR
YOURSELF. The high electrical voltage will harm or kill you.
– Use a phillips screwdriver to remove
2
the 2 top screws that hold the system
cover in place.
– Insert the Balboa Wi-Fi Cable into either Panel Jack
J45 or J33.
– Remove 1 screw to open the cable holder.
Advertisement
Related Manuals for Balboa bwa BP501
Summary of Contents for Balboa bwa BP501
- Page 1 – Use a phillips screwdriver to remove the 2 top screws that hold the system cover in place. STEP STEP – Insert the Balboa Wi-Fi Cable into either Panel Jack J45 or J33. – Remove 1 screw to open the cable holder. STEP...
- Page 2 Note: Place the Wi-Fi module away from any metal tub supports. 1219BP501/601 ©2019 Balboa Water Group. Single Source Solution. All rights reserved. 3030 Airway Avenue | Costa Mesa, CA 92626 | p 714.384.0384 | www.balboawater.com Specifications subject to change without notice.