Advertisement
STEP
4
STEP
5
– Insert the plastic holder and screw back
in place. Make sure the 2 cable wires are
secure in place.
This is how your system should look like when finished.
1219BP501/601
©2019 Balboa Water Group. Single Source Solution. All rights reserved.
3030 Airway Avenue | Costa Mesa, CA 92626 | p 714.384.0384 | www.balboawater.com
Specifications subject to change without notice.
– Place the Wi-Fi cable and Control Panel
cable inside the wire holder.
– Close up shot of how the 2 wires
should look.
– Close the Control Panel System cover and
secure the 2 top screws. YOU'RE DONE!
Note: Place the
Wi-Fi module
away from any
metal tub
supports.
Advertisement
