Patch Parameter; Master Tune Parameter; System Chorus Parameter; System Reverb Parameter - Casio AP-710 Manual

15

Patch Parameter

The main function of patch parameters is to configure the settings of the sound source of a device.
15.1

Master Tune Parameter

These parameters configure the Master Tuning settings.
Parameter ID
Master Fine Tune 0001 R/W 55-0:0
Master Coarse Tune 0002 R/W
15.2

System Chorus Parameter

These parameters are for configuring system chorus settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Type 0050 R/W
Rate 0051 R/W
Depth 0052 R/W
Feedback 0053 R/W
Tone 0054 R/W
Note1: For information about the relationship between setting values and send/receive values, see Spec Number in "18.7
Chorus Type Setting Value Table" in "VII Setting Values and Send/Receive Values" of this document.
15.3

System Reverb Parameter

These parameters are for configuring system reverb settings.
Parameter ID
Type 0080 R/W 000000
Time 0081 R/W
Early Reflection 0082 R/W
High Damp 0084 R/W
Tone 0085 R/W
Note1: For information about the relationship between setting values and send/receive values, see Spec Number in "18.6
Chorus Type Setting Value Table" in "VII Setting Values and Send/Receive Values" of this document.
15.4

Portamento Parameter

These are tone portamento operation setting parameters.
Parameter ID
Portamento Time 0064 R/W 55-0:0
Potamento OnOff 0065 R/W
R/W Block Size Array
10 01
↑
7 01
↑
7 01 00-02-0F
↑
7 01 00-03-7F
↑
7 01 00-13-7F
↑
7 01 00-00-7F
↑
7 01 00-7F-7F
R/W Block Size Array Min-Def-Max Description
7 01
↑
7 01
↑
7 01
↑
7 01
↑
7 01
R/W Block Size Array Min-Def-Max Description
7 01
↑
1 01
Min-Def-Max Description
0000-0200-03FF -100 - 0 - +99.8(cent)(1unit=100/512cent)
00-40-7F -24 - 0 - +24(semitone)
(Note1)
0-127
0-127
0-127
0-127
00-13-1B (Note1)
00-40-7F 0 - 127
00-40-7F 0 - 127
00-67-7F 0 - 127
00-65-7F 0 - 127
00-00-7F 0 - 127
00-00-01 0...Off
1...On
28