Note On; Control Change; Bank Select (00H,20H) - Casio AP-710 Manual

Note: This Instrument has a function that assumes connection of an external device that sends Note Off Velocity as a fixed
value. Note Off Velocity 00H is replaced with 40H until a Note Off message with a Velocity value other than 00H is received. This
function is enabled when the Instrument is turned on, and disabled by receipt of a Note Off message with a Velocity value other
than 00H.
4

Note On

Message Format:
n:
kk:
vv:
Transmit Sent when something is played on the keyboard. The key number changes in accordance
with on the Transpose function and Octave Shift function.
Receive Receipt sounds a note of the corresponding instrument part.
When a High Resolution Velocity Prefix message is received immediately prior to the Note On message
and the lower seven bits of the 14-bit Velocity are set, the 14-bit resolution note on is performed.
For information about the relationship between the Note On/Off message and High Resolution Ve-
locity Prefix message, see "Instrument Velocity Resolution" at the beginning of part II.
5

Control Change

Message Format:
n:
cc:
vv:
For details about messages, see each section of this manual that covers them.
5.1

Bank Select (00H,20H)

Message Format:
n:
mm:
ll:
Note1: For details about the relationship between the MSB value and the tone, see the Tone List that comes with the
Instrument.
Transmit Sent when a tone number is selected. For information about numbers, see the Tone List in
the User's Guide.
Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see "6 Program
Change".
9nH kkH vvH
MIDI Channel Number
Key Number
Velocity
BnH ccH vvH
MIDI Channel Number
Control Number
Value
BnH 00H mmH (MSB)
BnH 20H llH (LSB)
MIDI Channel Number
MSB Value(Note1)
LSB Value(Transmit:00H, Receive:Ignored)
8