Page 5
To power the machine on -> touch the power switch (The machine will enter function selection state) Select the default menu or DIY setting for temperature/time (The machine will enter the default menu or DIY settings state for temperature/time) Press the start/stop button(Machine will be begin cooking) Press the start/stop button a second time (Machine will stop cooking)
Preparation for use 1.The product should be placed on a steady flat surface, where the power cord can reach the power outlet; it should be placed in a well ventilated area away from any flammable substances.
Page 7
3.Before placing meal ingredients, preheat the machine for 3-6 minutes to improve the cooking effect.
Page 8
The frying barrel needs to be placed on a stable surface. meal ingredients After the machine is powered on the machine will chime, push the frying barrel into the machine. The machine will enter the function state and the display will show the set time and temperature.
Page 9
4.Select the required function through the control panel - the machine will show the set temperature and time or set the required time and temperature through the DIY function. Press the start key and the machine will enter the cooking state. If the frying barrel is not pushed in totally, the micro switch will not be triggered and the machine will remain in a powered-off state.
Page 10
Please only clean when the air fryer has cooled down so as to avoid scalding. After use, clean the frying basket and barrel timeously so as to avoid damage to the coating by erosive food residue and oil. Please do not clean machine with highly corrosive cleaning agents as it may be damaging to the machine or your health.
Troubleshooting Guide Fault Cause Troubleshooting Method Symptom Check whether the plug lnserl again or lo another socket is plugged in place 1--- The frying barrel is not Pull the frying barrel out and into the assembled properly machine again to assemble properly Thermostat (the protection Deliver the appliance to the authorized Not power on...
Need help?
Do you have a question about the MF-CN55A2 and is the answer not in the manual?
Questions and answers