Table of Contents
Advertisement
6.6.2
Replacement
The glass used is a ceramic glass, 5/32" (4 mm) thick, tested to reach temperatures up to
1400º F. If the glass breaks, it must be replaced with one having the same specification.
To remove or replace the glass (D):
THE IMAGES SHOWN ARE FOR GUIDANCE ONLY AND MAY BE DIFFERENT FROM YOUR PRODUCT,
1.
Unscrew the setscrew from the hinge at the top of the door to release the rivet (rod inserted in
the hinge). Remove the rivet while retaining the door. Lift the door (E) to remove it from the lower
hinge and place it on a soft, level surface.
2.
Remove the screws (A), the glass retainers (B), and the metal frames (C).
3.
Remove the glass (D). If it is damaged install a new one in place. The replacement glass must
have a gasket all around (see procedure below).
4.
Reinstall the glass, being careful to centre the glass in the door and not to over-tightening the
retaining screw.
The two main causes of broken door glass are uneven placement in the door and over-
tightening the retaining screws.
Page 26
BUT THE ASSEMBLY REMAINS THE SAME.
C
D
E
Installation and operation manual - Bistro woodburning cookstove
A
B
Advertisement
Table of Contents
