Technical Data - Samoa 383 500 Service Manual

TECHNICAL DATA

INTEGRATED METER TYPE
MOIST PART MATERIALS
INLET CONNECTION
OUTLET CONNECTION
MAXIMUM WORKING PRESSURE
BURST PRESSURE
COMPATIBLE FLUIDS
FLOWRATE
VISCOSITY RANGE
WORKING TEMPERATURE
PRESSURE LOSS AT MAXIMUM FLOW
PRECISION
PULSE RATIO
POWER SUPPLY
SOLENOID VALVE VOLTAGE
SOLENOID VALVE CONSUMPTION
STRAINER
CONNECTIVITY
WEIGHT
DIMENSIONS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
U·valve
Oval gear meter
Aluminium, Acetal,
Stainless Steel, NBR
100 bar (1450 psi)
200 bar (2900 psi)
Oil, glycol, coolant solutions
1 to 30 l/min (depending on fluid viscosity and temperature)
(0.25 to 8 gal/min)
8 to 2000 cSt
-10 ºC to 60 ºC (14 ºF to 140 ºF)
3 bar (43.5 psi)
±0.5% (after calibration)
328 ppl (1241.4 ppg)
24V AC 50/60 Hz
CAN Bus, Bluetooth
1600 g (56.4 oz)
U·valve +
1/2" BSP
1/2" BSP
24V DC
20W
MESH-60
CAN Bus, Bluetooth, Wifi
R. 02/20 838 844
EN
7