Nice Peccinin Safety And Installation Instructions Manual page 16

4. UNLOCKING MANUALLY
In case of lack of energy, you can easily switch the
machine from automatic mode to manual mode and vice
versa, as described below:
• Place the Yale Type key in place
• Turn the key as required (manual or automatic)
5. INSTALLATION
• Check if the voltage to be used on place it is the same
version of the product purchased (127V or 200V)
• This product operates at a frequency of 50/60 Hz
• The lock must be installed on the inside of the place.
• The fixation of the product depends on the type of
gate, the technician responsible is who will evaluate and
choose the best way.
• It is recommended to install the lock always in a fixed
location structure and the guide ramp of the pin in the
gate leaf.
• This lock has a fixing base that accompanies the kit, as
shown:
16 Electromagnetic lock for automatic gates