Operation; Danger Note; Halux N50-1 P Fx / Sx; Halux N50-3 P Fx / Sx - Derungs Dmed Halux N50-1 P SX Installation And Operating Instructions Manual

ENG
4.

OPERATION

4.1

Danger note

DANGER
Risk of death due to electric shock

Do not plug in damaged power cables.

If there are signs of damage to the power cord,
replace it immediately with a new one.

The supply voltage and frequency must match the
data on the product label

- The 180° position (parking position) is not permitted.

Sharp bending of approx. 90° at the connecting piece is
not permitted.

Example of a correct parking position

Plug in the cable

Connecting the cable to the mains

Before each use carry out a function test: all LEDs in the
light beam must light up
16
WARNING
Eye injury warning
►
This product may emit dangerous radiation. Never look
directly into the light cone.
►
The radiation emitted by this product conforms to the
exposure limit value for reducing the risk of photo-
biological hazards based on IEC 62471.
4.2

Halux N50-1 P FX / SX


ON / OFF Switch «A»
4.3

Halux N50-3 P FX / SX

Switch LED module on / off with "button B"


Set the desired illuminance in 5 dimming levels with
"buttons C"
Use "buttons D" to set the desired color temperature

according to the following table:
COLOUR
COLOUR
TEMP.
Blue
4400K
(neutral white)
White
3800K
(neutral white)
Red
3300K
(neutral white)
A
B
C
D
RECOMMENDATION
Ideal for the detection of
individual vessels and for
wound diagnostics
Ideal for general
examinations
Ideal for various types of
skin examinations