Subscribe to Our Youtube Channel
Related Manuals for SWELLPRO GC3-S
Summary of Contents for SWELLPRO GC3-S
- Page 1 GC3-S User Guide Visit www.swellpro.com for the latest version of this manual and firmware updates for your drone and accessories. V1.0 – June 2021...
-
Page 2: Thank You
SplashDrone 4 for the purpose of doing great photography. With the powerful 3-axis gimbal, GC3-S can capture ultra-smooth videos and crisp photos in the air or under water. GC3-S has Pro mode and supports RAW photos. ND filters can also be added for greater creative freedom. -
Page 3: Table Of Contents
ND Filter ..........................5 After Use Casing ......................... 6 CONTROL ..................6 Camera Status Indicator ..................... 7 Gimbal Control ........................7 Camera control ........................7 Calibration ........................... 8 APP INTERFACE ................9 SPECIFICATION ................11 Version Information ......................12 ©2021 SwellPro... -
Page 4: Precaution
Precaution ⚫ The GC3-S is a piece of precision electronics with corrosion-resistant materials which allow for use in harsh marine environments. As with any marine equipment, trouble-free and lasting operations depend on proper attention and maintenance of the equipment. ⚫ When taking off or landing, slowly proceed to avoid damage to the gimbal camera which can cause by the huge impact when contacting the surface at high speeds. -
Page 5: Install Sd Card
ND Filter GC1-S adopts a waterproof replaceable lens design. There is a separate SwellPro waterproof ND filter kit to give you a broader range of possibilities in your photography. -
Page 6: After Use Casing
2. After cleaning and drying the gimbal camera and the aircraft, secure the gimbal camera with the fixing case, then put the aircraft and other parts into the case. The case is secure and ready to be carried or transported. 6 ©2021 SwellPro... -
Page 7: Control
Tilt①: Roll the right gimbal control as shown to turn the gimbal up or down from 0° to -90°. Pan②: Roll the left gimbal control as shown to turn the gimbal left or right from -25° to 25°. ©2021 SwellPro... -
Page 8: Camera Control
"WARNING Aircraft Initializing, Please Wait" prompt disappears, power off and restart the drone. Gyroscope calibration is complete. 1) Do not calibrate the gimbal camera on a boat or other moving platforms. 8 ©2021 SwellPro... -
Page 9: App Interface
APP Interface To get into APP’s camera interface: Power on the remote controller, then the aircraft. Connect the phone to the remote controller’s Wi-Fi hotspot. Then click "Login device". Login device ©2021 SwellPro... - Page 10 Camera Interface Photo Setting Interface 10 ©2021 SwellPro...
-
Page 11: Specification
Video Setting Interface Camera Setting Interface Specification Gimbal Waterproof rating: IP67 Stabilization: 3-axis (tilt, pan, roll). Controllable range: Tilt: -90° to 0° Pan: -25° to 25° Max control speed: Tilt: 60 °/s Weight: About 145g Size: 71*55*65mm ©2021 SwellPro... -
Page 12: Version Information
10 or above, or with UHS-1 rating. Working temperature: -10°C - 40°C Version Information SwellPro products are constantly improving, so as the product user guides. It is recommended to visit www.swellpro.com to check and download the latest user guide. Version GC3-S User Guide First Edition 12 ©2021 SwellPro...
Need help?
Do you have a question about the GC3-S and is the answer not in the manual?
Questions and answers