Subscribe to Our Youtube Channel
Related Manuals for Ikon MICRO 04
Summary of Contents for Ikon MICRO 04
- Page 2 IKON WIND RANGE permitted by law as follows: To waive any and all claims that you have or may in the future have against IKON Estimate on 75kg Rider with a medium sized Twintip in the hands of experienced riders Kiteboarding, resulting from use of this product and any of its components.
- Page 3 2. WARRANTY POLICY 3. BAR PRESENTATION The warranty on Ikon products is only valid to the original purchaser of the kite from one A 45cm Snowbar comes with the Micro and the Kook. The Lazy, Patrol and Rafale come of our official retailer or through Ikon website.
- Page 4 System Under Bar front line release. push the red collar when you are in a dangerous situation. When you use your IKON kite, When you receive the bar, this feature is diconnected as it is a really sensitive safety, for the first time, try the release system.
- Page 5 3. BAR PRESENTATION 4. KITE PRESENTATION 4.1 Kite setup 3.4 Safety option Securing your kite on land: Safety 1 : Grab the Hand Brake with one hand then pull it behind your back and HOLD Layout your kite with bridles system facing up and trailing edge facing into the wind. If you are in any wind at all put some snow, sand or weight on the trailing edge and let the kite lay out down wind away from the weight.
- Page 6 4. KITE PRESENTATION 4. KITE PRESENTATION 4.3 Launch 4.2 Connection Make sure that kite is set up properly. With the kite situated downwind, hook into the Unwind your lines from your bar laying them out parallel to each other making sure to chicken loop.
- Page 7 If your kite lands leading edge down, simply pull the break handle (pulling more one side You have different manner to land your IKON kite, we recommend you to use this one : than the other) and your kite will begin to fly in reverse. Steer your kite so that the trailing edge is facing down.
- Page 8 4. KITE PRESENTATION 5. Care & Maintenance Gear 4.6 Pack 5.1 Bar 1. Secure your kite on the land with sand or snow To open the quick release follow steps 1 through 8. To reassemble, follow the steps in reverse and make sure to inspect all parts for damage and rinse the parts in fresh 2.
- Page 9 RIDE DIFFERENT...
Need help?
Do you have a question about the MICRO 04 and is the answer not in the manual?
Questions and answers