Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ikon PEAK 2-05
Summary of Contents for Ikon PEAK 2-05
- Page 3 If you are learning for the first time, we strongly recom- You have an IKON kite in your hands, IKON kiteboarding team is extremely glad and proud to offer mend lessons from a professional instructor connected to an authorized training center.
-
Page 4: Warranty Policy
2. WARRANTY POLICY 3. BAR PRESENTATION The warranty on Ikon products is only valid to the original purchaser of the kite from one of our The CONVERT BAR 2 comes in only one size 45cm wide. Our R&D department focused on the official retailer or through Ikon website. - Page 5 Pull the handle towards you and out off the cleat to recover full power setting. When you use your IKON kite, for the first time, try the release system. It's important, to feel it, and to know how it works, to use it rapidly when it’s needed. Lastly, be careful to your release system, it have to be correctly closed before each time you launch your kite.
- Page 6 3. BAR PRESENTATION 3.4 Chose your safety - 3 in 1 Otpion 01 : 4 Lines - safety on one front line (factory settings) The safety line is attached with a larks head knot to one of the front line. (see above) The safety line goes through the velcro at the back of the cleat.
- Page 7 3. BAR PRESENTATION 3.4 Chose your safety - 3 in 1 Otpion 02 : 4 Lines - safety on both front lines (for PEAK only) Steps to do from the factory settings to put the safety on both front lines : ONLY FOR THE PEAK 2 1 - Remove the stopper ball and undo the larks head knot.
- Page 8 3. BAR PRESENTATION 3.4 Chose your safety - 3 in 1 Otpion 03 : 5 Lines - safety on 5th line (Work for PEAK and BLIND) Steps to do from SAFETY MODE 02 : 1 - Remove the stopper ball and undo the larks head knot. 2 - Remove the RED pigtail attached to the ring.
- Page 9 4. KITE SETTINGS 4. KITE SETTINGS 4.1 PEAK 2 - FRONT LINE ADJUSTMENT 4.1 PEAK 2 - BACK LINE ADJUSTMENT The front line can be adjusted to fit your style of riding. 3 attachment points are available and are The back line can be adjusted to adjust the turning speed of your kite. Simply move forward the suited for waveride, freeride or freestyle.
- Page 10 4. KITE SETTINGS Connect the fifth line extension provided with the kite. 4.1 PEAK 2 - 5TH LINE ADJUSTMENT The 5th line on the PEAK 2 is only a safety line and this line is not supporting the leading edge. Therefore it’s better to have this line slightly lose.
- Page 11 4. KITE SETTINGS 4. KITE SETTINGS 4.1 BLIND 2 - FRONT LINE ADJUSTMENT 4.1 PEAK 2 - BACK LINE ADJUSTMENT The front line can be adjusted to fit your style of riding. 2 attachment points are available and are The back line can be adjusted to adjust the turning speed of your kite. Simply move forward the suited for freestyle or wakestyle.
- Page 12 4. KITE SETTINGS Connect the fifth line extension provided with the kite. Connect also the front line extension included in the kite bag. 4.1 PEAK 2 - 5TH LINE ADJUSTMENT The 5th line on the PEAK 2 is only a safety line and this line is not supporting the leading edge. Therefore it’s better to have this line slightly lose.
-
Page 13: Kite Setup
4. KITE SETUP 4. KITE SETUP 4.1 PUMPING THE KITE 4.1 LOCKING THE ONE PUMP VALVE Unscrew the top of the valve. Plug one of the fitting (coming in the kite bag) then pump the kite After your kite is pumped, lock the one pump valve on each strut to separate the inflated area in with a proper pressure ( 7 psi recommended). -
Page 14: Connecting The Lines
4. KITE SETUP Unwind your lines from your bar laying them out parallel to each other making sure to remove all twist starting from the bar. 4.1 CONNECTING THE LINES You will notice that the line ends are colored. Each line end is colored and labelled so it’s hard to Separate the bridle system: make connection mistake. - Page 15 We will update on a regular basis the support section content and “HOW TO” movie too. and make sure to inspect all parts for damage and rinse the parts in fresh clean water before You can directly contact us for any request, information or advise : info@ikon-kiteboarding.com reassembly.
Need help?
Do you have a question about the PEAK 2-05 and is the answer not in the manual?
Questions and answers