Return To Service Check; Disposition Of Failed Items - GOODRICH Stormscope Series II Installation Manual

4.8 RETURN TO SERVICE CHECK

After any repair has been made and after reinstallation of the equipment in the aircraft, do the post-
installation checkout procedure detailed in Chapter 3. The post-installation checkout procedure is intended
to verify that the system components are properly connected and that the installed system is operating
correctly.

4.9 DISPOSITION OF FAILED ITEMS

Return defective components to your authorized Goodrich Avionics Systems dealer or to::
If available, pack components in their original shipping container. If the original container is not available,
pack them as follows:
Do not use desiccant crystals when packaging electronic assemblies. Since the
assembly must be packed tightly, crystals in bag form cannot be used. The use of
loose crystals may cause unnecessary damage resulting in a cleaning problem.
1. Ensure that conductive covers/caps are installed on the exposed terminals of cable connectors on the
WX-950 display/indicator, and NY-163 antenna.
2. The WX-950 and NY-163 contain electrostatic discharge sensitive (ESDS) parts and must be wrapped
in static protective materials.
3. Wrap with bubble pack. Secure bubble pack with reinforced tape.
4. Place assembly in a cardboard box.
5. Wrap any accessories in tissue and place in the box. Fill spaces with bubble pack.
6. Attach a letter to the unit. The letter must contain:
•
Your name, address, and telephone number.
•
Purchase order number.
•
Description of component including, when applicable, model and serial number.
•
A brief description of the difficulty.
7. Shut box and seal with reinforced tape.
8. Attach packing list to outside of box.
4-14
Rev. C
WX-950
Installation Manual
Goodrich Avionics Systems
Attn: Customer Service
5353 52nd Street, S.E.
Grand Rapids, MI USA 49512
CAUTION