Table of Contents
Advertisement
Do not remove the type label from this product,
as this will void the warranty.
Power supply
Use only a power adapter which is certified for
this product (see Technical data, page 24).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
CAUTION!
Always use the
the projector off. This is essential to
prevent damage to the LED lamp.
Turn off the product and unplug from the
power outlet before cleaning the surface of
the product (see Cleaning, page 20). Use a
soft, lint-free cloth. Never use liquid, gaseous
or easily flammable cleaners (sprays, abrasives,
polishes, alcohol). Do not allow any moisture to
reach the interior of the product.
DANGER!
Risk of eye irritation!
This projector is equipped with a long-
life LED lamp, which emit very bright
light. Do not look directly into the
projector lens during operation. This
could cause eye irritation or damage.
Overview
button to turn
2 Overview
Top/Front view
Power button
a
•
Press once to switch the projector on
•
Press twice within one second to switch
the projector to standby.
CAUTION!
Always use the
projector. This is essential to prevent
damage to the LED lamp.
LED indicator
b
•
Turn white when the projector is
switched on.
•
Turn red when the projector is switched
to standby.
•
Turn blue when the projector is in
Bluetooth mode, used for streaming
music from a Bluetooth device.
Projection lens
c
Autofocus camera
d
Front IR sensor
e
a
b
c
d
e
button to turn off the
5
Advertisement
Table of Contents
