Esc C 4 N - Citizen CBM-820 User Manual

ESC c 4 n

[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
Selects No-paper Sensor Valid for Print Stop
ASCII ESC c
Hexadecimal 1B
Decimal 27
0 n 255
• This command selects in which status of the no-paper Sensor printing should be stopped.
Each bit has the following different meanings.
Bit
0 Undefined
1 Undefined
2 Undefined
3 Undefined
4 TOF sensor disabled
TOF sensor enabled
5 BOF sensor disabled
BOF sensor enabled
6 Undefined
7 Undefined
• It is possible to select multiple sensors as a printing stop condition, but if any one of them
detects the no-paper condition, the printer will stop printing.
• The printer stops printing after printing the on-going line and feeding the paper. If the panel
switch is disabled at this time, the printer will release the paper automatically and waits for
new paper to be set.
n = 0
ESC c 5
4 n
63 34 n
99 52 n
Sensor
– 61 –
Hexadecimal Decimal
– –
– –
– –
– –
00 0
10 16
00 0
20 32
– –
– –