Radio Operation; Cassette Operation - Crosley CR2405D Instruction Manual

English
5. To erase the whole disc, press the Erase button again before pressing
Play/Pause button. This display will show "ER ALL".
6. Press the Play/Pause button to confirm your selection, the erase process will
start and the display will show "BUSY".
7. When finished, the display will show "00". The disc is now ready to record
again.

Radio Operation

1. Press the Band Button to set the unit to radio mode.
2. Press the Band Button again to select between AM and FM.
3. Rotate the Tuning Knob for desired radio station.
Note:
 The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
 The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.

Cassette Operation

1. Press the Tape button to set the unit to Cassette mode.
2. Insert the prerecorded cassette through the cassette door and it will start
playing automatically.
3. To fast forward, press the cassette Eject/F.F button half way in. To stop fast
forwarding and return to the playback mode, press the button again.
Note: To rewind the cassette, you would need to reject the tape and flip it over for the
other side and fast forward.
4. To stop the playback and eject the cassette, press the Eject/F.F. button all
the way in.
5. When one side of the cassette finishes playing, it will stop automatically.
Note: Remove the cassette from the cassette holder when it is not in use.
11