DeWalt DWE7492 Original Instructions Manual page 15

Blade guard release lever
Lock/unlock cover at the main switch.
Unplug saw before changing blade
Protect the supply cord/plug against humidity and
sharp edges of saw blade
Date Code Position (Fig. A)
51
The Date Code , which also includes the year of
manufacture, is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A, B)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Table
2 Blade
3 Rip scale indicator
4 Fine adjust knob
5 Rail lock lever
6 Blade height adjustment wheel
7 Bevel lock lever
8 ON/OFF switch
9 Mounting holes
10 Mitre gauge
11 Blade guard assembly
12 Blade guard release lever
13 Splitter
14 Dust exhaust port
15 Guard dust exhaust port
16 Throat plate
17 Rip fence
18 Rip fence latch
19 Work support/narrrow rip fence (shown in stored position)
20 Blade wrenches
21 Push stick (shown in stored position)
50 Carrying handles
52 Non-through cutting riving knife
(shown in storage position)
Intended Use
DWE7492 table saw is designed for professional ripping, cross-
cutting, mitreing and bevelling with various materials as wood,
wood composite materials and plastics.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT use for cutting metal, cement board, or masonry.
DO nOT use shaping cutter heads on this saw.
DO nOT perform tapered cuts without a tapered jig accessory.
DO nOT use the saw for plunge or cove cutting.
These table saws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision. This product is not intended for use
by persons (including children) suffering from diminished
physical, sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a person
responsible for their safety. Children should never be left
alone with this product.
ASSEMBLY

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Unpacking
• Remove the saw from the packaging material carefully.
• The machine is fully assembled except for the rip fence,
blade guard assembly, mitre gauge, blade wrenches, and
dust extraction reducer port.
• Finalize the assembly following the instructions as
described below.

WARNING: Always keep the push stick in its place when
not in use.
Mounting the Saw Blade (Fig. A, C)

WARNING: To reduce the risk of injury, turn unit
off and disconnect machine from power source
before installing and removing accessories, before
adjusting or changing set-ups or when making
repairs. An accidental start-up can cause injury.

WARNING: When mounting the saw blade, wear
protective gloves. The teeth of the saw blades are very
sharp and can be dangerous.

WARNING: The saw blade MUST be replaced as described
in this section. ONLY use saw blades as specified under
Technical Data. We suggest DT4226. NEVER fit other
saw blades.
English
13