General Outline; Features; Unpacking - Citizen CBM-1000 User Manual

1. GENERAL OUTLINE

The CBM1000 Type II is a compact thermal line printer designed for use with a broad
array of terminal equipment including data, POS, and kitchen terminals.
With extensive features, it can be used in a wide range of applications.
To obtain the best results from the CBM 1000 Type II printer, please read the
instructions this manual thoroughly.

1.1 Features

G Paper drop-in mechanism. Supply/replace paper rolls by simply dropping a paper
roll into the printer and closing the cover. Greatly facilitates paper handling and
head cleaning.
G Ease of paper threading and head cleaning.
G High speed (150 mm/s), and low-noise thermal printing.
G Front-side paper ejection method. Allows printer installation and use anywhere
with few restrictions.
G Hermetic covering structure. Protects foreign matter or liquid from entering the
printer.
G Built-in input buffer.
G Barcode Printing. Made possible using special commands.
G Page mode. Now you can arrange pages freely.
G Registration of user-defined characters and logos into flash memory.
G Built-in drawer kick-out interface.
G Auto cutter mechanism provided as a standard unit.
G Two types of power supply. Select between an easy-to-handle, built-in power
supply type and lightweight flat AC adapter type.
G Can use 58 mm wide paper rolls by employing the supplied partition.

1.2 Unpacking

When unpacking the printer, confirm that the following are provided:
Printer
CAUTION
• Do not use the printer in an environment where condensation can occur. If condensation
forms, leave the power off until it completely evaporates.
Sample paper roll AC adapter
(provided with the A type only)
Partition AC power cord
(not supplied with Type D)
— 9 —
User's manual