Seats, Mirrors, And Steering Wheel - BMW Z4 Owner's Manual

CONTROLS

Seats, mirrors, and steering wheel

Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are
not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.
Sitting safely
An ideal seating position that meets the needs of
the occupants can make a vital contribution to
relaxed, fatigue-free driving.
In the event of an accident, the correct seating
position plays an important role. Follow the infor‐
mation in the following chapters:
▷ Seats, refer to page 100.
▷ Safety belts, refer to page 102.
▷ Head restraints, refer to page 104.
▷ Airbags, refer to page 152.
Seats
Safety information
Warning
Seat adjustments while driving can lead to un‐
expected movements of the seat. Vehicle con‐
trol could be lost. There is a risk of accident.
Only adjust the seat on the driver's side when
the vehicle is stationary.
100

Seats, mirrors, and steering wheel

Online Edition for Part no. 01402779113 - II/19
Warning
With a backrest inclined too far to the rear, the
efficacy of the safety belt can no longer be en‐
sured. There is a risk of sliding under the safety
belt in an accident. There is a risk of injuries or
danger to life. Adjust the seat prior to starting
the trip. Adjust the backrest so that it is in the
most upright position as possible and do not
adjust again while driving.
Warning
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
ment.
Electrically adjustable seats
General information
The seat adjustment for the driver's seat is
stored for the driver profile, refer to page 85, cur‐
rently used. When a driver profile is selected, the
stored position is called up automatically.
The current seat position can be stored using
the memory function, refer to page 107.