AEG L 76460 TL User Manual page 8

8
B • The default spin speed of the programme.
• 'No Spin'
C • The display symbols.
Symbols
D • The programme time
• The delay start
• Alarm codes
• Err
•
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON
Press button
programme.
1)
and 'Rinse Hold' symbols.
Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
Delay start
When the programme starts, the time decreases with steps of 1 minute.
When you press the delay start button, the display shows the delay start
time.
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Trouble Shooter' chapter.
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
When the programme is completed.
to start or interrupt a
4
2)
4 DELAY START BUTTON
Press button
programme from 30 minutes to 20
hours.
flashes.
4
to delay the start of a
5
5