Topcom Butler 550 User Manual

Butler 550 handset user guide on Freeport base
1.

Registration of Butler 550 on Freeport base _____________________________________ 1

2.

Making Internal calls ________________________________________________________ 1

3. External Calls _______________________________________________________________ 2
4. Anwsering internal and external calls___________________________________________ 2
5. Call Pick Up ________________________________________________________________ 2
6. Call Transfer To Other Extension ________________________________________________ 2
7. Call Forwarding ____________________________________________________________ 2
8. Do Not Disturb ______________________________________________________________ 2
9. Call Barring ________________________________________________________________ 3
10. Display Of Internal Telephone Number _________________________________________ 3
11. Display Of External Msn Number Assigned To Handset ___________________________ 3
12. Freeport Base Reset ________________________________________________________ 3
13. Activate Subscription Mode Of Freeport Base ___________________________________ 3
14. Removing Dect Handset From Freeport Base ___________________________________ 4
15. Changing The Freeport Access Code (Ac) ______________________________________ 4
16. Changing The Administration Pin Code (Upi) ___________________________________ 4
17. Assigning An Msn Number To A Handset _______________________________________ 4
1. Registration of Butler 550 on Freeport base
Activate registration mode on Freeport base:
•
unplug and replug power
Or
•
via the PC configuration software in < basestation configuration > / < registration mode>
Or
•
via other handset already registered on the Freeport base :
•
Dial ' * 782 # ' (SUB) on the handset
•
Press off hook key
• Enter the administration pin code : ' 1111' (default value)
•
Press confirmation key on handset (OK or #)
•
Enter :
• ' 1 # ' : to activate the subscriber mode
•
Press on hook key
2. Making Internal calls
Press <INT> key followed by extension number