Directive Systems & Engineering DSE945LYRMK Quick Start Manual

9cm Loop Yagi Kit (Rear Mount), Model DSE945LYRMK
Frequency range:
Number of elements:
Boom length:
Boom diameter:
Mast diameter:
Weight: (assembled)
Connector:
Quantity Description
0.5" x 48" drilled boom
1
0.5" x 36" drilled boom
1
2 reflectors 1&2
1 driven element
11 directors 1-11
7 directors 12-18
6 directors 19-24
12 directors 25-36
6 directors 37-42
1/2" black end caps
2
Anti-Seize Compound
1
Anti-Seize Compound - Apply a small amount of the supplied Anti-Seize Compound to the aluminum joints and
to the threads of the U-Bolts to prevent galling.
BEFORE INSTALLING YOUR NEW ANTENNA, PLEASE BE SURE
CAUTION: While we strive to remove all burrs from all machined parts, there is always the possibility of
sharp edges. We strongly suggest checking the edges and use a fine file, or 400 grit
sandpaper, to remove any burrs that may have been left.
DSE945LYRMK Rev 12/20
Directive Systems & Engineering
2702 Rodgers Terrace
Haymarket, VA 20169-1628
www.directivesystems.com

SPECIFICATIONS

3.4 to 3.5 GHz
45
60 inches
0.5 inch
1 1/2 inches max
1.5 pounds
Type-N female

PARTS LIST

Note: All hardware is Stainless Steel unless otherwise noted.
TO READ THE ENCLOSED WARNING PAMPHLET.
703-754-3876
Gain:
3 dB Beamwidth
(E plane):
F/B ratio:
Maximum Power:
Stacking distance:
Quantity Description
3-48 x 3/4" machine screw
44
3-48 x 3/4" split lock washer
44
3-48 x hex nut
44
8-32 x 1/2" machine screw
2
8-32 x 1" machine screw
2
4 #8 split lock washer
4 #8 hex nut
1 boom to mast angle bracket
1 boom to mast plate
1 U-bolt with nuts & saddle
1 Cable assembly w/connector
1 Assembly manual
20 dBi
16º
>20 dB
100 W average
9 inches' vertical
9.8 inches' horizontal