Chapter 4: Advanced Configuration; Setup; System > System Settings - Cisco SLM2005 User Manual

5-port and 8-port 10/100/1000 gigabit smart switch with pd and ac power business series
Hide thumbs Also See for SLM2005:
Table of Contents

Advertisement

Chapter 
Chapter :
Advanced Confguraton
Open your web browser and enter http://19.168.1.5
into the address field. Press the Enter key and the Password
screen will appear.
Address Bar
NOTE:
The default IP address is 19.168.1.5.
If the IP address has been changed, enter the
assigned IP address instead of the default.
The first time you open the web-based utility, enter admn
(the default username) in the username field and leave
the password blank. Click the OK button. You can set a
password later from the System > System Settings screen.
Login Screen

Setup

The first screen displayed upon login is the System Settings
screen. There are 10 options across the top of the screen:
System, Port, VLAN, Securty, QoS, STP, Statstcs,
Multcast, Admn and Logout. Each option contains
screens that will help you configure and manage the
Switch.
System > System Settings
The System > System Settings screen displays a summary of
Switch information.
System > System Settings
5-Port and 8-Port 10/100/1000 Ggabt Smart Swtches wth PD and AC Power
Advanced Configuration
System Name
This field allows you to enter/modify the
name of the Switch.
System Locaton
This field allows you to enter/modify
the location name of the Switch.
MAC Address
The MAC address of the Switch is displayed
here.
S/W Verson
The software version of the Switch is
displayed here.
IP Address
The IP address assigned to the Switch is
displayed. The default IP address is 19.168.1.5.
Subnet Mask
The Subnet Mask assigned to the Switch is
displayed. The default is 55.55.55.0.
Default Gateway
Displays the IP address of the gateway
between this device and management stations that exist
on other network segments. The default value is 0.0.0.0.
DHCP Server
The IP address of the DHCP server.
Enable DHCP
When enabled, the Switch will attempt to
obtain an IP address from a DHCP server on your network.
If an IP address is not obtained, the Switch will use the IP
address defined in the IP Address field below.
IP Address
The IP address assigned to the Switch
can be modified in this field. The default IP address is
19.168.1.5.
NOTE:
If the static IP address is changed, the
Switch will automatically log you out of the
web-based utility. To log back in, you must use
the new Static IP address.
Subnet Mask
The Subnet Mask assigned to the Switch can
be modified in this field. The default is 55.55.55.0.
Default Gateway
The IP address of the gateway can be
modified in this field. The default is 0.0.0.0.
Management VLAN
Enter the ID of the configured VLAN
(1-4094, no leading zeroes). By default, all ports on the
Switch are members of VLAN 1. However, the management
station can be attached to a port belonging to any VLAN,
as long as that VLAN has been assigned an IP address.
Username
Specifies the username. The default username
is admn. Only one admin user is allowed.
Password
A new password can be entered in this field.
The password is not displayed as it is entered. Each
character is displayed as a bullet in the password field.
Web Admn Tmeout (secs)
web-based utility will timeout after being idle for the
amount of time defined in this field. If the Switch is idle
for the amount of time defined here, login is required
to return to the web-based utility. The time is entered in
seconds. The default value is 00 seconds.
As a security measure, the
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slm2008Linksys slm2005Linksys slm2008

Table of Contents