Specifications - Cisco SGE2010 Datasheet

© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Dual images for resilient firmware upgrades
●
96-Gbps nonblocking, store-and-forward switching capacity
●
Simplified QoS management using 802.1p, differentiated services (DiffServ), or type of
●
service (ToS) traffic prioritization
Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply
●
Unit
Fully resilient stacking provides optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Configuration and monitoring from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and
●
security
Private VLAN Edge (PVE) simplifies network isolation of guest connections or autonomous
●
networks
Automatic configuration of VLANs across multiple switches through Generic VLAN
●
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol
●
(LACP)
Enhanced rate-limiting capabilities, including back pressure and multicast, broadcast, and
●
flood control
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 10 KB
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
●
Monitoring (RMON) support
Fully rack mountable using included rack-mounting hardware
●

Specifications

Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SGE2010 48-Port Gigabit Switch
Table 1. Specifications for the Cisco SGE2010 48-Port Gigabit Switch
Specifications
Ports
Buttons
Cabling type
LEDs
Performance
Switching capacity
Forwarding capacity
Stacking
48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 Gigabit combo ports
shared between mini-GBIC ports; console port; auto MDI/ MDI-X; auto negotiate/manual
setting; RPS port for connecting to redundant power supply unit
Reset button
Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP
Category 5 Ethernet or better for 1000BASE-T
PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
96 Gbps nonblocking
71.4 mpps (64-byte packets)
Data Sheet
Page 2 of 5