Cisco Linksys SFE2000 Administration Manual page 52

Fast ethernet switch release 1.0
Hide thumbs Also See for Linksys SFE2000:
Table of Contents

Advertisement

Select Edit to make changes. When your changes are complete, press the Esc key to
return to the Action menu, and select Save to save your changes.
File Management
The File Management screen allows you to upload or download files, such as the startup
configuration, boot, or image file, using a TFTP server.
NOTE: There are two software images
on the Ethernet switch: Image 1 and
Image 2. When you copy an image to
the switch via TFTP, the inactive image is
replaced. When you copy an image to
the switch via the console port, the
active image is replaced.
Upgrade / Backup
Select Edit to change the settings. Specify the source and destination of the file, the file name,
and the IP address of the file server where the upgrade file is being downloaded, When your
changes are complete, press the Esc key to return to the Action menu, and select Execute to
upload or download the designated file.
Active Image
The Active Image screen shows information about the active image file and the image file
that will be active after reboot.
46
Linksys One Ready Communications Solution
Chapter 4: Console Configuration
Configuring the Switch through the Console or Telnet Interface
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfe2000pLinksys sfe2000p

Table of Contents