MOPEKA Pro M1017 Series Quick Start Manual

INTENDED USE OF THE M1017 SENSOR IS TO MEASURE THE AMOUNT OF LIQUID WATER INSIDE A WATER
TANK MEETING THE SPECIFATIONS BELOW, UNDER THE CONDITIONS LISTED BELOW.
USE OF THIS DEVICE IN A MANNER OTHER THAN STATED IN THIS MANUAL, MAY RESULT IN IMPAIRMENT OF
MEASUREMENT METHOD
FLUID
TANK TYPES
TANK SIZES
Envelope Dimensions
Mounting location
OPERATING TEMPERATURE RANGE
BATTERY
MAILING ADDRESS: 1223 INDUSTRIAL DR, SUITE A; NEW BRAUNFELS, TX 78130
www.mopeka.com
Pro Sensor Models M1017--- (Water)
THIS DEVICE IS INTENDED FOR OUTDOOR USE ONLY.
THE DESIGNED SAFETY PROTECTION AND THUS AN UNSAFE CONDITION.
Ultrasonic
Water, Gray Water. NOTE FOR BLACK WATER OR OTHERWISE
HEAVILY CONTAMINATED WATER.
Steel, Aluminum, Plastic
Not intended for use on composite tank materials.
Up to 48-inch fluid height
73 mm Diameter x 7.3 mm Thickness (2.87 x 0.29 inches)
Tank Bottom
-30° TO 55°C
ONE, CR2032 COIN CELL (3V)
THIS DEVICE IS NOT TO BE REPAIRED OR OTHERWISE MODIFIED.
MOPEKA PRODUCTS LLC
support@mopeka.com
WARNING

SPECIFICATIONS

WARNING
www.mopeka.com
Page 1 of 7
M200005A