Advertisement
Q.
Can I manage the Cisco Enhanced EtherSwitch Service Modules using the Cisco SDM?
A.
Cisco SDM Version 2.2 supports routers with the Cisco Enhanced EtherSwitch Service Modules installed.
Q.
Can I manage the Cisco Enhanced EtherSwitch Service Modules with Cisco Network Assistant?
A.
Yes, Cisco Network Assistant supports the Cisco EtherSwitch Service Modules.
Q.
Can I use the Cisco Configuration Engine to deploy the router and Cisco Enhanced EtherSwitch Service
Modules?
A.
Yes, Cisco IE 2100 Series agents are embedded in Cisco IOS Software; they run on both Cisco integrated
services routers and Cisco Enhanced EtherSwitch Service Modules.
Q.
Can I access the Cisco Enhanced EtherSwitch Service Modules using Secure Shell (SSH) Protocol?
A.
You can if you have an encryption image installed on the hosting module; that is, if you have an image with the
designation K9 in the image name, you can use SSH to access and configure the Cisco Enhanced EtherSwitch
Service Modules.
Printed in USA
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Q&A
C67-554789-00
10/09
Page 7 of 7
Advertisement
