Subscribe to Our Youtube Channel
Related Manuals for Steelmate 888N
Summary of Contents for Steelmate 888N
- Page 1 All rights reserved The trademark, patent and copyright are owned by Steelmate Co., Ltd. The right to change designs and specifications for improving the product is reserved...
-
Page 2: Table Of Contents
Two way coded car alarm system Contents Top 8 reasons to choose Steelmate Top 8 reasons to choose Steelmate -------------------------------- 1. Professional manufacturer with super quality Important notice ----------------------------------------------------------- Brief look at each device------------------------------------------------ 2. Complete range of products, you can choose what you... -
Page 3: Important Notice
Two way coded car alarm system Brief look at each device Important notice Please install the system by an authorized engineer. Antenna Charging socket Keep the product and the transmitters away from water. It is highly recommended to read this manual carefully before using this unit. -
Page 4: About Lcd Screen
Two way coded car alarm system About LCD screen Mute button Press button once to arm in mute mode and lock the doors. Press button for 2 seconds to activate anti-hijacking function while engine is running. Clock alarm Disarming with door unlocked Battery indicator Press... -
Page 5: Turn Transmitter On/Off
Two way coded car alarm system Turn transmitter ON/OFF Transmitter charging Charging: Insert the charger’s plug into transmitter’s battery The transmitter needs to be turned on before the first charging socket, and then insert the charger into the vehicle’s use, the factory setting is OFF. cigarette lighter. -
Page 6: Functions
Two way coded car alarm system PIN code Functions 1. Alarm arming & locking the doors Disarming with PIN code When armed, the system will respond if unauthorized entry In arming mode with PIN code, press button, the siren will is attempted. -
Page 7: Disarming & Unlocking The Doors
Two way coded car alarm system Press button once again, the LED indicator will flash with Press button for 2 seconds, turn signals will flash for about 10 seconds without siren chirping. Press button to stop this turn signals flash once, the siren will not chirp, then the vehicle is armed with shock sensor, tilt sensor and microwave sensor function. -
Page 8: Impacting Shock Sensor
Two way coded car alarm system 6. Impacting shock sensor icon and the icon will flash on the transmitter’s LCD screen, the backlight will turn on, the engine will be immobilized, The system is a 2-stage warning system: the system will return to its former arming status after alarm. In alarm arming mode, the first shock impact will trigger the In mute arming mode, the movement of the car will trigger the 1-stage warning of the system, the siren will chirp 3 times... -
Page 9: Led Indicator
Two way coded car alarm system icon on the transmitter’s LCD screen will flash quickly 3 times every 2 seconds until the system is show on. This action will repeat once. disarmed and the doors are opened. When the microwave sensor detects To open door/trunk/hood, turn ACC ON, or press footbrake will continuous movements for 28 seconds trigger the system, the LED indicator will flash quickly and... -
Page 10: Emergency Override
Two way coded car alarm system 15. Emergency override 18. Not armed warning When the transmitter is lost or damaged and the car is armed, When the car is parked with the doors closed and the system open the door with key and keep the door open, press footbrake, is not armed in 10 seconds, the siren will chirp “Bee-Bee”... -
Page 11: Open Trunk Reminding
Two way coded car alarm system In 35 seconds, if the door is still not closed completely, the The alarm signal will be sent to both transmitters when the siren will chirp with turn signals flashing until the system is alarm system is triggered. -
Page 12: Disable The Former Transmitters
Two way coded car alarm system Technical parameters (2). Clock alarm setting: When “ALARM” icon flashes on the LCD screen, press button to enter and set the clock alarm ON or OFF. Frequency range: 433.92MHz When “ON” flashes on the LCD screen, press button once to enter the alarm time setting mode, set the alarm time by ECU:... -
Page 13: Troubleshooting
Two way coded car alarm system Troubleshooting Troubleshooting Fault Causes Fault Causes 5. The siren does not chirp 1.The continuous The plug is improperly inserted. The siren is damaged. when the alarm system is chirping of the siren The wire is improperly connected. The wire connection between triggered. -
Page 14: Warranty
Two way coded car alarm system Warranty I. The unit is warranted for a limited period of time from the date of purchase. In the unlikely event of a defect arising in this product when used in accordance with the manufacturer's instructions, the parts would be repaired or replaced free of charge.
Need help?
Do you have a question about the 888N and is the answer not in the manual?
Questions and answers