Page 1
Motor Vehicle Owners. Steelmate is not just a Brand... it is a culture ... a group of people striving to provide better and more efficient products in a rapidly changing world. It is a group of people who work hard, and stake their reputations on a successful outcome.
Page 2
Features: 1. Long distance surveillance range 2. Two-way remote controller with color LED monitor 3. FSK technique, high stability and anti-jamming 4. Sound, vibrancy, figure indicate the status and function...
Page 3
REMOTE FUNCTION AND OPERATOIN FOR MODEL 888 CAR ALARM SYSTEM FCC/ID Q6W888A FCC NOTICE: (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
To press button on the remote to activate the alarm system: Press button --- in general status: to arm the car and lock door in 3 seconds. --- in driving status: to lock door --- in alarm status: to stop alarm and return to the arm status. Press button --- in armed status: to disarm the car and unlock door.
Page 5
1. Alarm Armed: Press button on the remote, is signaled by one flash of the direction lights, one acoustic signal of siren and one acoustic signal of remote, doors will lock, the system will be armed in 3 seconds in alarm mode. The display on the remote is: 2.
Page 6
To press button the siren will alarm for 30 seconds and direction lights will flash to locate the vehicle. 8.Emergency aid In driving status, To press button + ask for help, the siren will chirp for 30 seconds and the direction lights will flash, press any button on remote will stop chirping.
Page 7
CONTROL UNIT FUNCTION AND OPERATOIN FOR MODEL 888 CAR ALRM SYSTEM FCC NOTICE: (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 8
In alarm armed status, the first impact to vehicle will trigger the alarm. The control unit will receive the impacted signal from the shock sensor and transfer the signal to siren, direction light and the emitter. Then the siren will chirp for 5 seconds, the direction lights will flash, the emitter will transfer the information to the remote, and the remote will beep.
Page 9
If there is no continuous impact to the vehicle, the mute alarm status will last for 30 seconds, and then will return to mute armed status. 3. Emergency alarm In alarm armed status, the car door opened, or foot brake pressed or Acc turned to On position will trigger the alarm system.
Page 10
shock sensor will send the signal to the control unit, and the control unit will arm the system by itself. 8. Auto hint and auto arm function (optional) After parking the car with the door closed, but the alarm is not armed. The control unit will send signal to the siren to submit three beeps to hint the driver to arm the system.
Page 11
When the power wire is cut off, the control unit will preserve the status and when the power is supplied the system will return to the former status in 5 seconds. 15. Indicating to lock the doors When the system is armed, if the doors are not locked properly, the main unit will received the signal from the central lock and send signal to the siren and direction lights.
Page 12
10 seconds. The two new remote are Only two remote controllers are functional for car alarm system with code hopping function, the lost remote controller will not operate the system again. EMITTER FUNCTION AND OPERATION FOR MODEL 888 CAR ALARM SYSTEM: FCC/ID Q6W888...
Page 13
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
Important notes: The remote distance will be affected by environment. Please pay attention to the signal received by remote, make sure that the vehicle is in the effective range of the alarm system. The system has one or two remotes. Please do not put the two remotes together at the same time when the system is active. The battery of back-up remote should be taken out when it is not used.
Need help?
Do you have a question about the 888 and is the answer not in the manual?
Questions and answers