RAK RAK7431 Quick Start Manual page 5

Documentation Center
7. On the next page, select the settings provided below:
LoRaWAN Class: C
Join Mode: OTAA
Description: Optional
RAK7431 Configuration
Connect the RAK7431 to your Network
1. Connect the RAK7431 to a computer using the Micro USB cable.
2. Open the RAK Serial Tool and select the correct COM port. The default baud rate is 115200.
3. After selecting, press Open.
To set up the Device EUI, run the command:
Figure 8: Adding the RAK7431 to the Built-In Server
Figure 9: RAK Serial Tool