Advertisement
Documentation Center
RAK Serial Port Tool
Web Management Platform Documentation
Gateway Configuration
Set-up the Built-in Network Server
1. Sign in to the gateway by following the
Platform documentation.
2. Setup the RAK7249 WisGate Edge Max using its Built-in Network Server by following this guide.
Adding Application
1. To enter the application configuration interface click: LoRaNetwork > Application. Enter a name for the
application and click the Add button.
2. Turn on the Auto Add LoRa Device slider.
3. Generate Application EUI and Application Key by pressing the generate icon marked in the image below.
NOTE
The description is optional.
- used to configure the RAK7431 WisNode Bridge Serial
- guide on how to configure the RAK7249 WisGate Edge Max
Accessing the Web Management
Figure 4: Create Application in the Buil-In Network Server
section of the WEB Management
Advertisement
