Hard Floor Scrub Attachment - Vax SPOTWASH Manual

USING YOUR MACHINE
Operation
Unwrap the cord from the
quick cord release hooks.
1 2
Select the desired tool
attachment.
For spills, always pick up
the excess liquid before
using water/solution.
Tilt the tool forward on to
the spill and pull back.
IMPORTANT: Over or under tilting the hand tool may result in poor water pick up.
10
Plug the machine into the
mains and switch on.
Multi-purpose Attachment
1
For cleaning carpets, rugs,
sofas and upholstery.
Hard Floor Scrub
2
Attachment
For cleaning tiles and
sealed wooden floors.
Press the trigger on the
wash tool to release
water and solution.
Unclip the wash tool and
lift the hose out of the clips.
Fit the front of the selected
attachment into the front of
the wash tool and push the
clip down to click into place.
Use the brush to agitate
any stubborn stains.
Press the on/off button to
switch the machine on.
Release the trigger and tilt the
nozzle forwards so the nozzle
is in contact with the surface.
Pull back to recover the water
and solution.