Do you have a question about the SPOTWASH and is the answer not in the manual?
Questions and answers
Louise
March 11, 2025
How do I use the self clean port as lost instructions
1 comments:
Mr. Anderson
March 11, 2025
To use the self-clean port on the Vax SpotWash:
1. Empty the Tanks: Remove and empty the dirty water tank into a drain. Also, empty the clean water/solution tank. 2. Add Warm Water: Pour about 1 inch of warm tap water (no hotter than 40°C) into the bottom of the machine. 3. Reconnect the Tank: Place the dirty water tank back onto the machine. 4. Remove the Attachment: Detach the cleaning tool from the hose. 5. Activate Self-Cleaning: Plug the hose into the self-clean port and turn on the machine to flush out any remaining dirt and residue.
This process helps maintain the hose and ensures optimal performance.
Need help?
Do you have a question about the SPOTWASH and is the answer not in the manual?
Questions and answers
How do I use the self clean port as lost instructions
To use the self-clean port on the Vax SpotWash:
1. Empty the Tanks: Remove and empty the dirty water tank into a drain. Also, empty the clean water/solution tank.
2. Add Warm Water: Pour about 1 inch of warm tap water (no hotter than 40°C) into the bottom of the machine.
3. Reconnect the Tank: Place the dirty water tank back onto the machine.
4. Remove the Attachment: Detach the cleaning tool from the hose.
5. Activate Self-Cleaning: Plug the hose into the self-clean port and turn on the machine to flush out any remaining dirt and residue.
This process helps maintain the hose and ensures optimal performance.
This answer is automatically generated
how much spot wash in 300ml water
Spot washer stopped sucking water up