Black & Decker M270 Manual page 3

ENGLISH
Features
1. Speed control switch
2. Release button
3. Motor unit
4. Rating plate
5. Beaters
6. Mounting holes for beaters
Assembly
Switch off the appliance and allow moving
parts to stop before changing accessories
or approaching parts that move in use.
Fitting the beaters
Switch off and unplug the appliance.
Insert the stem of a beater (5) into one of the mounting
holes (6) in the motor unit (4).
Push and turn the beater (5) until in locks into place.
Repeat for the other beater.
Removing the beaters
Switch off and unplug the appliance
Rotate the speed control switch (1) to '0' to turn the
appliance off.
Push the release button (2) down to release the beaters.
Use
Keep hands, long hair and loose clothing away
from the beaters.
Position the power supply cord so that it does
not hang over the edge of worktops and cannot
be caught accidentally or tripped over.
To switch on, move the speed control switch (1) to one of
the positions 1 (lowest speed) to 6 (highest speed). It is
recommended to start at a low speed, and then change to
a higher speed if necessary.
To switch off, move the speed control switch (1) to
position 0.
Do not operate the appliance continuously for
more than 10 minutes. After operating the
appliance continuously for 10 minutes, let it
cool down for at least 10 minutes before
operating it again.
When working with liquids, use a low speed in order to
avoid splashing liquid onto the appliance.
Firmly hold the container that you are using with the mixer.
3
Speed Function
1 Blend To combine liquids, fold in dry
ingredients, egg whites and whipped
cream.
2 Stir To prepare sauces, gravies, puddings,
muffins and quick breads.
3 Mix To prepare batters and mixes.
4 Beat To cream butter and sugar, make cookie
dough, cake mixes and icings.
5 Whip To cream together, shortening and sugar.
6 Whip To whip and fluff mixtures, whip cream,
beat eggs (whites, yolks or whole) and
mash potatoes.
Cleaning and maintenance
Before cleaning and maintenance, switch the
appliance off and unplug it.
Wash the beaters (5) in warm soapy water and dry well.
Wipe the motor unit (4) with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Protecting the environment
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Use