AEG L7TB73E User Manual page 20

20 www.aeg.com
10.7 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
10.8 Starting a programme
with the delay start
1. Press button Startuitstel again and
again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pauze.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pauze to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pauze to set the
appliance to pause.
The related indicator flashes.
2. Press button Startuitstel repeatedly
until the display shows .
3. Press button Start/Pauze again to
start the programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Start/Pauze.
The related indicator flashes.
2. Change the option set.
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
new time value.
3. Press the button Start/Pauze again.
The programme continues.
10.11 Cancelling a running
programme
1. Press button Aan/Uit to cancel the
programme and to deactivate the
appliance.
2. Press button Aan/Uit again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 The ProSense load
detection
After touching the Start/Pauze button:
1. The indicator
2. The ProSense starts the laundry load
detection to calculate the real
programme duration. The indicator
and the time dots flash.
3. After about 15 minutes the display
shows the new programme duration:
the indicator
time dots stops flashing.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
flashes.
goes off and the