AEG L7TB73E User Manual page 16

Table of Contents

Advertisement

16
www.aeg.com
7.7 Vlekken/Voorwas
Press this button repeatedly to activate
one of the two options.
• Vlekken
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate
phase of the washing programme.
This option can increase
the programme duration
and is not available with a
temperature lower than
40 °C.
• Voorwas
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
The corresponding indicator above
the touch button illuminates.
7.8 Spoelen
With this button you can select one of
the following options:
• Extra Spoelen option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Only Rinse
option
The appliance performs only the
rinsing phase, the spinning and the
. The stain remover
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
7.9 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero
, the indicator
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the lid unlocks.
A small laundry load helps to
reach better results.
7.10 Startuitstel
With this option you can delay the start
of a programme in a more convenient
time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauze button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
7.11 Start/Pauze
Touch the Start/Pauze button to start,
pause the appliance or interrupt a
running programme.
is
starts
and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents